Invacare 9000XT Manual Wheelchair Features
- Intended for indoor and outdoor use on firm surfaces free of climbing obstacles
- Urethane casters for lightweight and smooth ride
- High performance, low maintenance and low total lifetime cost wheelchair
- Provides stability to meet each user skill level
- Multiple frame color variations for customizing
- Combines the strength and durability
- Easy-to-clean nylon upholstery
- Dual-axle allows for user to self-propel or be propelled by a caregiver
- Click Here For User Manual
Note: 9000 XT wheelchair components are interchangeable with all other 9000 series and Invacare Tracer series chairs.
How to fold and unfold the Invacare 9000XT Wheelchair?
Unfolding:
- Tilt the wheelchair towards you (raising the opposite wheel and caster off the ground/floor).
- Place your hand on the top of the seat rail closest to you where the seat upholstery is attached.
- Point your fingers and thumb to the inside of the wheelchair.
- Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks.
- Engage both wheel locks, open the footrest/legrest for clearance and transfer into the wheelchair.
Folding:
- Swing footrest/legrest in locked position to the front of the wheelchair.
- Pivot footplates upward to vertical position.
- From behind the wheelchair, grasp the right hand edge of the solid seat. Raise the seat to the hinged side.
- With both hands, grasp the middle of the front and back edges of the solid folding seat and lift up until the wheelchair begins to close.
- Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armrest towards you.
How to Clean 9000XT Wheelcahir?
- Hot water and a mild detergent on soft cloth should be used for cleaning metal surfaces
- Wipe down with damp cloth
- Dry surface by wiping down with dry cloth
- Car polish and soft wax can be used to remove abrasions and restore gloss Warranty Limited
Warranty
- 5 year on Frame and cross braces
- 1 year on all components
Specification
Particulars |
Dimensions |
Chair Dimensions |
Seat width |
Adult to hemi frame: 14", 15", 16", 17", 18", 19", 20", 22" |
Seat depth |
16" standard frame
17", 18" by seat extensions on adult to hemi frame |
Seat to floor height |
17.5", 18.5", 19.5" 15.5", 16.5" with different wheel and caster packages |
Back height |
15" to 19" adjustable height
(adjustable angle available as option) |
Overall Dimensions |
Overall width |
21", 22", 23", 25", 27", 29" |
Folded width |
11.3" |
Overall depth without riggings |
31" |
Overall height |
34"-38", 1" increments |
Product weight without riggings |
31lb |
Product weight capacity |
250lb |
Casters and Wheels |
Caster height |
6", 8" |
Wheel height |
20", 22", 24" |
Arm style |
Full-length fixed height, padded, flip back, removable Desk-length fixed height, padded, flip back, removable Full-length adjustable height, padded, flip back, removable
Desk-length adjustable height, padded, flip back, removable
(All arm styles available conventional or space saver) |
Front riggings |
Hemi swingaway footrest 17" to 21"
Hemi swingaway padded elevating legrest 17.5" to 21" |
Note: All specifications are approximate |
Warranty
Limited Warranty, 5 year on Frame and cross braces, 1 year on all components