Graham-Field Lumex Stand Assist Patient Transport Lift

How To Assemble Graham-Field Patient Transport Lift?

1. Place the base assembly on the floor and lock the back casters for ease of assembly 
2. Insert the kneepads into the kneepad support unit. Install the two hex bolts through lock washers, flat washers, and kneepad support unit into nuts as shown above. Tighten securely with the provided wrench. Install the two plastic caps on the hex bolts. 
3. Attach the kneepad assembly to the two side support arms. Face the square holes on the side support arms inward; fit the square shoulder of each carriage bolt in the square hole, installing each carriage bolt through the kneepad assembly bracket and side support arm from the inside as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Do not tighten the nuts; some play in this assembly will be needed to assemble the entire unit 
4. Insert the two tubular cross bars into the holes on the seat pad and handle bar support units as shown above. Align the small holes on the cross bar undersides with the holes in the support units. Install the four button socket head cap screws through the support units into the cross bars. Use the hex key to tighten. 
5. Insert the kneepad side support assembly into the base brackets as shown above. The kneepads and arm curvature should be facing away from the lockable casters  
6. Insert the seat and cross bar assembly into the tubes at the top of the kneepad side support assembly 
7. Fasten the seat and cross bar assembly, kneepad side support assembly, and base assembly together with carriage bolts:
   - Attach the kneepad side support assembly to the base assembly. Fit the square shoulder of each carriage bolt in the square hole at inside of base bracket, installing each carriage bolt through the base and kneepad side support assembly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Tighten the two nuts securely using the provided wrench.
   - Attach the seat and cross bar assembly to the kneepad side support assembly. Fit the square shoulder of each carriage bolt in the square hole at inside of kneepad side support assembly, installing each carriage bolt through the kneepad side support assembly and seat and cross bar assembly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Tighten the two nuts securely using the provided wrench.
   - Securely tighten the four nuts that attach the kneepad assembly to the two side support arms, installed in step 3, using the provided wrench. 

Warning: Before operating the Stand Assist, ensure that all components are properly and securely assembled and that all fasteners are secure.

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Graham-Field Lumex Transport Lift Specification

Customer Reviews