Bio Protech MAXTENS 1000 Analog Dual Channel TENS Unit

Frequently Bought Together

• BioMedical Electrolyte Solution And Skin Prep Spray
• BioMedical Tens Prep Wipes
• Bio Protech Elite Silver Film Tricot Electrode

How to use Bio Protech TENS 1000 Pain Control Device?

1. Slide Cover: A slide-on panel cover covers the controls for Pulse Width. Pulse Rate. Mode Selector and Modulation Selector. Your medical professional may wish to set these controls for you and request that you leave the cover in place.
2. Display LED: Each of the LEDs illuminates whenever the electronics of the device create a current impulse. Due to the capacity of the human eye, the illumination of the lamp can only be recognized up to a frequency of approximately 30 Hz. At higher frequencies, the lamp will appear to be constantly illuminated.
3. On/Off Switch and Intensity Control: If both controls are in the off-position the device is switched off.

 

4. Lead Connector: The connection of the electrodes is made with a two-lead connector. The device must be switched off before connecting the cables. Both intensity controls must be at the off position. Electrodes must be pressed firmly on the skin.

 

5. Mode Control: Expose the controls by sliding the front cover down from the top of the unit. This switch has 3 positions: B for Burst stimulation. N for Constant stimulation. and M for modulation stimulation. Push the Mode Selector until engaged in the position desired.

 

6. Pulse Rate Control: This dial determines how many electrical impulses are applied through the skin each second. By turning these controls, the number of current impulses per second(Hz) for both channels can be continually adjusted. Unless otherwise instructed. turn the pulse rate control to the 2-150 Hz range.

 

7. Pulse Width Control: This dial adjusts the length of time each electrical signal is applied through the skin, which controls the strength and sensation of the stimulation.

 

8. Timer Control: The treatment time of TENS can be preset with Timer Control. This switch has 3 positions, 15, 30, and C (Continue). Push the Timer Control Until engaged in the position desired.

 

9. Check/Replace the Battery: Over time, in order to ensure the functional safety of TENS, changing the battery Is necessary.
   1. Make sure that both intensity controls are switched to the off position.
   2. Slide the battery compartment cover and remove it.
   3. Remove the battery from the compartment.
   4. Insert the battery into the compartment. Note the polarity indicated on the battery and in the compartment
   5. Replace the battery compartment cover and slide it close
   6. If the output adjust is not set to "0" while the battery is being connected. Prostim unit will not operate.

How to maintain and store MAXTENS 1000 Analog TENS Unit?

1. The non-flammable cleaning solution is suitable for cleaning the device. Note: Do not smoke or work with open lights (for example. candles. etc.) when working with flammable liquids.
2. Stains and spots can be removed with a cleaning agent.
3. Do not submerge the device in liquids or expose it to large amounts of water.
4. Return the device to the carrying box with sponge foam to ensure that the unit is well-protected before transportation.
5. If the device is not to be used for a long period of time. remove the batteries from the battery compartment (acid may leak from used batteries and damage the device). Put the device and accessories in the carrying box and keep it in a cool dry place.
6. The packed TENS device should be stored and transported under the temperature range of - 20t — +60-C, relative humidity 20% — 95%, atmosphere pressure 500 hPa 1060hPa.

MAXTENS-1000 User Manual

Precautions:

• TENS is not effective for pain of central origin (This includes headache)
• TENS devices have no curative value
• Keep the device out of reach of children
• Long-term stimulation at the same electrode site may cause skin irritation
• Effectiveness is highly dependent upon patient selection by a person qualified in the management of pain patients
• Simultaneous connection of a patient to an HF SURGICAL EQUIPMENT may result in burns at the site of the stimulator electrodes and possible damage to the stimulator
• Operation in close proximity (e.g. 1m) to a shortwave or microwave therapy equipment may produce instability in the stimulator output
• Remove batteries if the unit is not used for a long period of time
• Never apply electrodes over irritated or broken skin

Contraindications:

• If you have a demand—type cardiac pacemaker. do not use a TENS unit
• Do not use TENS on the carotid sinus (neck) region
• Do not use TENS for patients with known myocardial disease or arrhythmias without consultation and evaluation by a physician
• Do not apply TENS for undiagnosed pain syndromes until etiology is established
• Do not place electrodes on the site that may cause current to flow trans cerebrally (through the head)

Indications

• Post-Surgery
• Post-Trauma or Accident
• Arthritis
• Joint or Muscle Conditions
• Alternative to Prescription Drugs

Specifications of Bio Protech MAXTENS 1000 TENS Unit

MAXTENS 1000 Warranty

MAXTENS 1000 carry a warranty of one year from the date of delivery.

Customer Reviews