Winco Inverness Premium Recliner

What are the Benefits of using Winco Inverness Premium Recliner ?

Head RestComes standard with one HC24 Head Rest Cover

TT Side Table Option
Unique side table design for the Winco 6240 Inverness 24 Hour Treatment Recliner. Available individually. Specify left, right or both.

HM - Heat and Massage Option
Winco has designed a Heat and Massage option for their entire clinical chair line. With this Winco Heat and Massage Option, two separate pads gently warm the seat and back of all of these chairs, creating a more comfortable environment for your patient. One of the more common complaints among patients in dialysis clinics is that they can’t seem to get warm, or if they do manage to get warm, they don’t stay that way for long.

AIRX Arm Rest Covers
Beautiful, contoured armrest covers add protection and security to the Inverness and Augustine. These form fitting designs are specific to the options on the individual chairs like the side tables, pivot tables, and heat only or heat and massage options. Generous arm coverage is assured with tailored cutouts for the EZ-Pull handles.

SilverTex Color Option
SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex

Flammability Compliant Materials Option (CAL 133 - TB 133)
Products manufactured with this option meet the requirements for California Technical Bulletin 133 Flammability Test Procedure for Seating Furniture for Use in Public Occupancies as outlined at the document published by the State of California Department of Consumer Affairs Bureau of Home Furnishings and Thermal Insulation.

Designed With Patients - Patient independence, with no need to rely on staff for assistance is now a reality. We listened to patients and included:

• An infinitely adjustable backrest that locks in the chosen position
• Our innovative design requiring 50% less pull force for one-handed positioning.
• Patient comfort in every position; full upright to laying flat
• Wide seats, padded, naturally curved armrests, accessible controls, and strategically located lumbar support.

During development surveys, many patients noted that they would choose clinics with this chair, bypassing those without.

Designed With Clinicans - We also listened to the clinician and designed

• Higher patient positioning with side tables at an ideal level to reduce potential for back strain.
• Bilateral controls that are easily accessed from either side.
• Foot operated swing-arm latch releases, unique foot plate lock and Trendelenburg controls to reduce bending, stooping and straining.
• Gas cylinder and spring supported mechanism to significantly ease any required effort to help patient recline or sit upright.

We’ve strived to address everything, including never hidden, always accessible, front caster locks.

Designed With The Facility - The Inverness 24-Hour Treatment Recliner’s form and function make it a practical and valuable tool, easily expanding nocturnal capacity to existing clinics.

• Both arms swing out 180 degrees for barrier free patient transfer
• Innovative safety shields direct errant fluids and make cleaning a snap.
• Generous seat width and 500 pound weight capacity eliminate the need for multiple models.
• Swing arm design allows deployment of Trendelenburg function even when fully open.

We also took into account the unique requirements of older retrofit clinics. With the arms fully open, the Inverness extra large sized chair will easily roll through a 34.5” opening!

Important Safety Instructions

DANGERTo reduce the risk of electric shock always unplug this product from the electrical outlet before cleaning, maintenance or servicing.

WARNING
1. Unplug this product from the electrical outlet when not in use.
2. Supervision should be provided when using this product.
3. Use this product only for its intended use as described in this manual.
4. Do not use attachments not recommended by the manufacturer.
5. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water, contact an authorized Winco service center for instructions.
6. DO NOT carry or pull this product by power supply cord or use the cord as a handle.
7. Keep the cord away from heated surfaces.
8. Do not use outdoors.
9. To disconnect, turn all controls to the "off" position, then remove plug from outlet. Pull plug only to remove cord.
10. Clean switch with a damp cloth only – Warranty will be VOID if liquid is introduced into switch mechanism.
11. Extension cords are not recommended.
12. DO NOT roll recliner or other equipment over cord.
13. This product is for use on a nominal 120-volt circuit and has a three-pin plug. If the plug does not fit into the outlet, contact a certified electrician to install the proper outlet. DO NOT MODIFY THE PLUG IN ANY WAY. No adapter should be used with this product.
14. For an added level of safety; Winco recommends the use of a 120 volt GFCI (ground fault circuit interrupter) outlet.
15. Keep children away from extended foot support (or other similar parts).

DANGER

• Never insert pins, or attach other metallic fasteners into/onto any part of this chair.
• Do not use this product if the covering shows signs of deterioration, such as checking, blistering, or cracking.
• KEEP DRY - Do not operate in a wet or moist condition or environment.

WARNING

• Long term, continuous exposure to heat may cause burns. It is recommended that skin in contact with heated area be checked for redness and blistering during long term usage. Do not use on an infant, invalid or incapacitated person. Do not use on insensitive skin or on a person with poor blood circulation. If you are uncertain if you should use this product, please consult your physician about the use of heat and massage.
• Do Not Crush/Pinch heating elements or wiring.

Operating Instructions

Recline Chair From Attendant PositionAttendant should be positioned on the RIGHT or LEFT side of chair

1. While occupant is seated in the chair, use one hand to operate the recline lever, located on either side of chair, to activate the legrest into its raised position.
NOTE: Activate the legrest by pulling the recline lever (A) 1/2 way out. To recline the back, fully extend the recline lever (A).

2. To operate the infinite back positioning, after occupant;s feet have been raised, use one hand to operate the recline lever (A) and the other hand to push on the upholstered back (B) until desired position or maximum recline has been reached.
Release recline lever (A) to maintain position.

IMPORTANT
Do NOT force the back of chair up or down without fully extending either of the two recline levers, this can damage the chair.

Return Chair Upright From Attendant Position

Attendant should be positioned on the RIGHT or LEFT side of chair

1. While occupant is reclined in the chair, attendant should use one hand to operate the recline lever (A), located on either side of chair, while using the other hand to pull up on back (B).
Release the recline lever (A) once the back has fully returned to the upright position.
NOTE: To return the back to the upright position, fully extend the recline lever (A). Once the cack is returned to the upright position, release the handle and push the legrest closed.

2. Attendant should use one hand to push down on the legrest (A) until it locks into its stored position.
NOTE: The recline lever does NOT have to be used to return legrest to its stored position.

WARNING
Attendant should NOT use foot to return the legrest to it;s stored position. Damage to mechanism and upholstery may occur.

Specification

Customer Reviews