Winco Extra Large Padded Blood Drawing Chair With Drawer

Winco Extra Large Padded Blood Drawing Chair With Drawer

Brand/Manufacturer: WINCO
Save

Winco Extra Large Padded Blood Drawing Chair With Drawer is constructed of sturdy, powder-coated steel frames for maximum strength and years of trouble-free service. Winco blood-drawing chair features an adjustable-height, flip-up, steel reinforced, contoured urethane armrest for optimal comfort, easy access, and added safety. In addition to adjustable armrests and high impact leveling feet the XL Blood-Drawing Chair features a 24-inch wide padded seat, and are designed with added weight capacity to safely accommodate patients up to 450 lbs.

Item# 2574

Features

  • Winco Extra Large Padded Blood Drawing Chair has flip-up, steel reinforced, contoured urethane armrest for optimal comfort, easy access, and added safety
  • Comfortable seat ans back rest
  • Adjustable height armrests
  • Manufactured with sturdy, powder-coated steel frames for maximum strength and years of trouble-free service
  • High impact plastic storage drawer features a spill-containing top and a rugged aluminum box
  • High-impact leveling feet provides stable seating on almost any surface.
  • Click Here for Owners Manual
  • Intended use:
    - For use in medical settings
    - It is designed without wheels and is not electrically powered
    - It is intended for use in blood donation, collection, or sampling procedures
  • Note:
    - SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex.

More Information

  • Tools Needed:
    - Multiple size wrench included (or your own 5/16, 3/8” & 7/16” or adjustable wrenches)
    - Phillips-head screwdriver
    - Scissors or box cutter
    - Powered tools not recommended
  • Seat Installation:
    1. Position Chair Frame in upright position. Check tightness of all installed screws, bolts and nuts in case they loosened during shipping.
    2. Align the screws on bottom of the Seat Assembly, with the Seat Support holes. Seat Supports are angled to give the seat a very slight recline angle. The front of seat should be positioned toward the higher end of the strap. Be sure that all (4) Seat Screws go completely through the Seat Support straps on chair frame.
    3. Install (4) lock nuts to the screws on the Seat Assembly and completely tighten with 7/16” wrench.
  • Arm Installation:
    1. Insert it into the Receiving Tube on Seat Frame Assembly.
    2. Then adjust the arm to the desired height and tighten the knob. Screw the Knob into the Slot. This will “capture” the arm and keep it from being able to be pulled out of the frame accidentally.
  • Cleaning Instructions:
    - Remove grime, hair and body oils.
    - Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery).
    - Avoid harsh detergents that could damage the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.

Specification

Particulars Dimension
Weight61 61lb (27.67kg) 
Height 36.5" (92.71cm)
Width with Tray Down 40.25" (102.24 cm.)
Length 25" (63.50cm)
Seat Height 22.5" (57.15cm)
Seat Width 24.25" (61.60cm)
Seat Back Height 16" (40.64cm)
Armrest Height 28.25"  (71.76cm)
Maximum Armrest Height 34.25" (87cm)
Seat Depth 18.5" (46.99cm)
Weight Capacity 450lb (204.12kg)

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close