Winco Designer Care Recliner

How to use Winco Care Recliner?

Reclining the Care Recliner

• From the #1(Seated Upright) position, grip the arm rests and simultaneously lean body weight back. Push rearward with your arms until desired recline position #2(TV) or #3(Recline) is reached.
  Note: The footrest will simultaneously elevate.
• An attendant can also recline the chair to position #2 or #3 by simply grasping the armrest with one hand, and the top of the chair back with the other; Then push back on the back of the chair.
  Note: This applies only to positions 2 and 3, and not  engaging the gas spring for trendelenburg.
• Trendelenburg positioning must only be performed by an attendant. While occupant is in the chair, place the chair into the fully reclined position(#3). The gas spring must be engaged by squeezing the Release Handle at the top of the backrest. Do not force back of chair downward without squeezing the Release Handle. This will damage the chair . The chair back will stay in trendelenburg position when pressure is removed from the Release Handle.
• After each use of Trendelenburg return the chair back to regular positioning by squeezing the Release Handle and lifting up until chair back is fully upright.

Returning Care Recliner To The Upright Position

• From the Reclined position, grip the arm rests and simultaneously lift body weight upward while pulling on armrests. Continue until desired position is reached. Push down on footrest with feet to lower legrest.
• An attendant can also return the chair to the upright position by grasping the armrest with one hand, and the top of the chair back with the other; then pull the back of the chair upright. The attendant can lower the footrest by pushing down on the footrest.
• Trendelenburg positioning must only be performed by an attendant. The gas spring must be engaged by squeezing the Release Handle at the top of the backrest.

Warning

• Keep children away from extended foot support (or other similiar parts). 
• Do not put hands, feet or clothing into any openings when changing positions on recliner. Attendant must confirm that users arms, legs, hands and feet are safe while changing recliner positions or serious injury may result.
• Remove or move chair accessories out of the way of patients legs (ie. over-lap table & pivot table) when reclining/changing position of patient. 
• Lock casters at all times when chair is stationary. Unlock casters when moving/transporting chair.
• Stay clear of the recliner mechanisms. 
• Do not use recliner for transporting in or with any type of vehicle or trailer. Winco recliners have not been tested or approved for use by an occupant in any type of vehicle or trailer. 
• Never use the chair arms or backrest as a seat; serious injury or damage may occur. 
• Periodically check the tightness of all nuts, bolts and screws. 
• Immediately remove from service; Any recliner with broken recline mechanisms, torn upholstery, or other mechanical or visible damage. 
• Never transport user with chair arms in an "open or down" position. Applies to Drop-Arm and Swing-Arm models.
• Use only Winco authorized replacement parts.

How to Clean Winco Designer Care Recliner?

• Remove grime, hair and body oils. 
• Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery). 
• Avoid harsh detergents that could damage the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. 
• Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.

Winco Designer Care Recliner Specifications

Winco Warranty

• Limited One Year Product Warranty:
  - Winco Mfg., LLC warrants the complete product for one (1) year. At Winco Mfg., LLC sole discretion, it may repair or replace any components freight free that are found to be defective during the first year. 
• Limited Three Year Warranty:
  - Winco Mfg., LLC warrants recliner mechanisms, electrical components, vinyl panels and vinyl on upholstered parts [from cracking or delaminating] pressurized gas springs and casters, when new, for a period of three (3) years. At Winco Mfg., LLC sole discretion, it may repair or replace components found to be defective. 
• Limited Lifetime Chair Frame Warranty:
  - Winco Mfg., LLC warrants steel and aluminum base frames for all products, when new, for the lifetime of the original purchaser. This limited warranty does not apply to paint/finish or any components attached to the frame such as; upholstery, foam, casters, mechanisms or related parts that are covered under above warranties. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim.

Customer Reviews